Laser lights play a vital role in Christmas. In fact, for many people, Christmas can never be without the lights. One thing that draws consumers to this type of light is that it’s very easy to install. Unlike the traditional lights, which feature many small bulbs and wires, this one comes in the form of a spotlight. Chances of the wires being entangled are not there. Setting them up is also easy because one unit will cover a large area. The normal type would require you passing strands of wires with bulbs over objects and also making sure they are well secured. Another advantage is that they tend to run cooler, consume lesser power and also reach quite far.
While the laser lights are readily available thanks to growing awareness and increasing competition among vendors and manufacturers, many people still complain that they are a bit costly. This is probably due to the superior laser technology. And because of this, many people are left out when it comes to ownership. They are forced to look for cheaper ones, which at times are of sub-par quality. The coverage may not be very good, they don’t have the dazzling effect or may run too hot and this greatly reduces their lifespan. However, did you know that you could decide to make your very own Christmas laser lights? Also, check our article on securing Christmas laser lights. Don’t worry as these lights are completely safe to use.
A Complete Guide How To Make Christmas Laser Lights
Why make your own Christmas laser lights?
Like many other people, you may be asking or wondering why makes your own laser lights. Is it not a hard process, and doesn’t it require lots of skills or effort? Well, the following are reasons why creating your own product is beneficial:
Making your own product is usually cheaper than buying an already made product. This is because you will be looking for the best sources. This may be from old units lying around, from friends who may have faulty units or may even come across the parts being sold at auction sites, discount stores, and more.
Sense of achievement
Nothing beats the joy and pride of having succeeded in creating a functional light. The pride of telling your friends that you built it from scratch or wallowing in the envy of other people. Due to this, many people don’t mind spending time researching and coming up with unique or customized units.
Assured of quality
Getting a good product is becoming harder by the days. First, there are so many products in the market and you don’t know how well they are made. Secondly, the biggest origin is the Far East and many people say a good number of products from the region are not the best of quality. By making them yourself, you have more control in regards to quality, reliability, efficiency and also durability. Check Here Best LED Christmas Lights.
Making the Christmas laser light
How To Make Christmas Laser Lights Step 1: Gather the necessary apart and tools:
A closer look at the product reveals that they all come and function in a similar manner. They also have a few main parts, which are as follows:
- Laser beam/light unit
- Laser beam splitter
- Power circuit board
- Case/ shell / housing
- Heat sink.
Skip to Best Laser Christmas lights
How To Make Christmas Laser Lights Step 2: Understand the role of each part:
Before beginning assembly, it pays to know what each part is and the role it plays. This makes the assembly easier and you will have more confidence when putting them together. Their roles are as follows:
Laser beam/ light unit: This small unit features a bulb-like section. It will mainly come in red, blue, or green color. Its role is to produce the laser beam, which will be shone on a surface.
Laser beam splitter: this unit Is found on the back of the front piece of the projector. It appears like a hole. However, if you look closely, you will see two square pieces that are stuck on each other at right angles. They allow the laser beam to be refracted and split into many smaller lights.
NB: Instead of this type of splitter, you may also choose the motorized type. It works the same but relies on a flap that moves.
Power circuit board: This PCB board contains the circuitry and accessories such as diodes, capacitors, and more. It supplies the power to the laser unit and also the motorized unit if it has one.
Heat sink: This metallic part is normally made from aluminum or alloy. Its role is to dissipate the heat generated. This helps to keep the pats and interior cool. It also helps to extend the lifespan of the accessory.
Shell/ case: This is the housing that will accommodate and protect the circuit board, laser unit, and splitter. It is made from heavy-duty plastic to withstand the heat, moisture, vibration, and more.
How To Make Christmas Laser Lights Step 3: Connect the parts
Joining the parts is relatively easy. The laser unit and the motor just need power. The pieces will be marked, with (+) being positive and (-) being negative power. The first step is fitting them inside the housing. Then you secure them with strong or hot glue or with tiny screws. Position the laser unit so that it emits the light beam as required.
Fit the heat sink to help in the removal of the heat produced. There are very many types you can use. Some attach to the metallic pole or stake that connects to the bottom section while others will be placed near the base near the air openings or vents. Normally the larger the part of the more the fans the better the heat dispersion.
Thereafter, you fit the top cover which as the aperture that does the splitting. It may require some bit of trial and error to get the best position. If It isn’t properly aligned some of the light may be obstructed. It also should not be too far or too near as this may affect the dispersion. Check Out Best LED light Strip
As you can see, creating your own Christmas laser light isn’t that hard. All you need is getting the parts, having a plan, putting them tougher, and then powering up the unit. Once you succeed in doing this, you will find yourself creating more units for yourself or even friends.