Are you worried that someone may get away with your Christmas light projectors while you are away? Well, truth is that you are not the only one. In fact, a good number of people has woken up in the morning or come back home only to find the item missing or has been tampered with. This obviously did ruin their Christmas. First, there were no dazzling lights to add excitement. Secondly, the person may have been forced to buy another item if finances allowed. Third, it ruined the Christmas spirit. To avoid such incidences, you can always secure the light projectors. In the following read, I’ll show you how to do it without busting the bank account. Also check our article on installing Christmas laser lights.
How to Secure Christmas Light Projectors
Secure Christmas Light Projectors Step 1: Find the perfect spot:
Before you even start on the project, first find the perfect location. It will be placed that allows the projector light to do its job with minimal interference or obstruction. It will also provide some form of protection to the unit against the elements. This is despite the fact that the best Christmas light projectors are weatherproof. They will handle the rain, wind, snow, and other things well.
People normally place the unit near large trees. As an alternative, you may place it next to a large and sturdy post or pole, or a statue or fountain. The goal is to find a strong point that can easily be moved. Also, check our article on securing Christmas light projectors.
Secure Christmas Light Projectors Step 2: Get the necessary tools and accessories:
After identifying the best location(s), you need to gather the necessary items. Of course, you’ll have the projector(s) to be installed. The other important tools include a wire rope, wire rope clips, wrench/ adjustable spanner, and a drill.
The length of the rope will depend on how close the piece is to the mounting point and also the diameter of the point. For instance, if it’s a little far from the tree or pole, then you’ll need a longer wire. This also applies if the tree, pole, or post, the statue has a large diameter.
NB: For safety reasons, you should wear safety glasses or goggles. This stops flying debris from entering your eyes. It may be plastic from the projector, a broken drill bit, grass or even soil. Skip to Best Christmas laser lights reviews
Secure Christmas Light Projectors Step 3: Drill a hole in the handle or end section of the projector:
The projector light will have the light and lens at the front section. The rear end will usually have a small pole/ stick that normally screws inside the piece that is inserted in the ground. This section won’t have any sensitive components and is usually made from plastic.
Take the drill (portable or electric) and fit a drill bit on the head. The size of the bit will depend on individual preference and also the size of the projector. You don’t need a very powerful drill or drill bit because the item is normally made from plastic.
Find a nice location and gently drill the hole. And as always, be careful when doing this. Handle the piece firmly and start at a low speed and then increase as you go on.
Secure Christmas Light Projectors Step 4: Pass the wire rope through the hole.:
After drilling the hole, take one end of the wire cord and pass it through the drilled hole. The diameter of the hole is influenced by the thickness of the wire rope. And the thicker it is, the wider the hole. You should ensure the wire is tough and made from materials such as stainless steel and carbon steel. They are much harder to cut through and are also flexible at the same time.
It’s also advised to go for stainless, galvanized, or zinc coated steel wire. It is resistant to rust and corrosion. This ensures that the beauty of the overall setup isn’t undermined.
Secure Christmas Light Projectors Step 5: Secure one end of the wire rope with a clip:
After passing one end of the wire through the hole in the projector, you then clamp the end to the wire with a wire clip. It will press the two sections together. All you need is to tighten the two nuts, one on end of the clip/ clamp with a wrench or adjustable spanner. Turn the nuts until they are very tight.
Like the wire, you should also make sure the clamp/clips are made of tough and rust/ corrosion materials such as galvanized or stainless steel.
Secure Christmas Light Projectors Step 6: Pass the other end of the wire rope around the holding punt:
Take the other end of the wire cord and pass it around the tree, post, pole, statue or any other mounting point. Take the end and place it against the wire and clip it’s tightly. This is similar to what you did with the end harnessing the projector.
The distance between the projector and holding point will depend on the user and also the surrounding. The general rule is to not leave to much distance as this makes it less noticeable.
How To Secure Christmas Light Projectors Step 7: Confirm everything is tight and secure:
After completing the job, confirm that everything is in order. The hole is properly drilled and that it has not broken or doesn’t feel weak. The wire passes through nicely and has been tightly secured to another part of the wire. The cord also goes around the tree, post pole or any other point nicely and the other end is also well harnessed to the wire. A slight tug of the wire will give you a feel on how tight the unit it.
Conclusion:
There you have it. Simple tips on how to secure the Christmas light projectors. And as you have seen, we didn’t burn holes in the pocket. It is also a simple process that can be carried out by anyone willing to do it. It requires the basic everyday tools which include a wrench or spanner, an electric drill, clamps, and wire cord. You also don’t need to invest in additional attachments or accessories. What’s even more exciting is that it doesn’t in anywhere interfere with the functionality of the projector. It will tilt and move freely, the lighting won’t be obstructed, and you can easily remove the securing cord and claps. Always ensure the Christmas light projectors are secured for piece-of-mind. People like to decorate their houses with different LED Christmas lights.
