Christmas laser lights do add life and merry to the outdoor scene. They will dazzle the surrounding and skies with many colors that create a breathtaking experience. This defiantly makes the Christmas season livelier and goes a long way in spreading the cheer. This is probably why they are replacing the traditional lights. A single piece will offer the service of several light bulbs. It is also much easier to install since you don’t have long strands of wire to deal with. Cases of burnt out bulbs are also unlikely.
These lights are usually installed outdoors. And just like other accessories, they will be prone to be stolen by unscrupulous individuals. Some will want to make a quick buck from selling them. Others may just be doing it for fun. You also have some nosy animals who may think it is cool or get away with the light. Can you imagine discovering the laser lights are not where they were or are missing? In the following guide, we will look at securing the Christmas laser lights in a simple and easy manner. Also, check our article on making of Christmas laser lights.
How to Secure Christmas Laser Lights?
Step 1: Gather The Tools
To complete the installation, you will need several tools. They are as follows:
- Wire rope: this is a wire that is constructed from steel. It comes in tiny strands and is very strong and resistant to cuts. Cutting through the wire is quite a challenge when using normal tools such as a pair of pliers, shears, clippers, or any other.
- Wire rope clamps: This small clips/clamps are also made from steel. They feature an opening between two small fasteners (screws, nuts) on each side. The space between the top and button section can be varied by either tightening or loosening the two nuts or bolts on either end.
- Wrench/adjustable spanner: this tool allows you to tighten or loosen fasteners such as bolts and nuts. The adjustable type can handle different sizes. It is made of metal. Most will work well in the above project.
- Drill: This tool allows you to drill a hole on different surfaces.it features a chuck or head that houses a drill bit. By turning the bit, it will bore through the materials. You can pick a portable drill, an electric corded type, or even use a hand drill, which unfortunately requires you to applying lots of effort and also takes time.
NB: A pair of pliers or sturdy cutter may also be needed to cut a very long wire. Of course, you will need to have the Christmas projector light with you. Skip to Best Christmas laser light
Step 2: Find a Strong Mounting Point
The whole idea of securing the light is to prevent unauthorized people from stealing or getting away with it. To achieve your goal, you need to secure it to a strong and solid point. The kind of object you use varies with the surrounding. For instance, if you have a large tree, then you can use it.
In case you do not have a tree nearby; you can still create a strong mounting point. You can sink a strong metal bar or poll into the ground, and leave a small area exposed. If it is near the fence, you may choose o harness the light to a strong frame. You can also decide to secure the laser light to a stone or metal statue.
Step 3: Drill the Base of the Arm
Christmas laser lights come with a sort of a small protrusion or pole on the lower section. It screws into another piece that is usually driven into the ground. It will be solid and made from heavy-duty plastic.
You first need to unscrew it from the hollow section. Next, you take the drill with the drill bit and bore a hole. Make sure it is well centered, as this is the strongest point. If it is too near the edges, it is easy to break. You should pick the right drill bit and this is influenced or determined by how thick or thin the wire is.
Step 4: Secure the Laser Light with The Wire Rope
Take wire rope and to push it inside the drilled hole in the arm of the projector light. Let it go through and then come in contact with the rest of the wire. The next step is to secure the two parts using the wire clips. You can either pass the small and the length through the midsection or completely unscrew the clamp and then place the two sections on the lower section then clamp it with the top section.
Tighten then the bolts or nuts on the two ends using the wrench. If done properly the gap will be minimal and the wires will be held tightly. It’s always a good idea to go for high-quality products since they are more reliable and durable.
Step 5: Secure the Other Rest of the Wire Cord
You then take the rest of the wire and let it go around the identified obstacle. It can be a standing tree, a tree stump, pole sunk into the ground, a solid statue, and fence support or any other. Just like the other end, you join the end section to the wire and clamp the two parts together using the wire clamps.
Now the laser light is secured to the object. We can now say that it is theft resistant and chances of it being stolen are minimized.
Conclusion
As you may have seen, securing the laser light is possible with the basic tools. It doesn’t require greats skills or complicated tools. The wire rope, clamps, and the rest of the tools are readily available and don’t cost much. The entire process takes a short time and is very effective. You won’t need to keep worrying about the lights or being startled when you hear any movement. You also do not need to spend lots of money and effort. Follow the above simple steps and you should be able to safeguard Christmas laser light and also have peace of mind.
